Intuitive Color LED Controls
The Nissin Di700A has an intuitive LED control panel that is so easy to use you can change all your flash and wireless settings with just one finger.
Integrated Wireless Receiver
The Nissin Di700A has an integrated wireless NAS (Nissin Air System) slave receiver.
Full Rotation Flash Head Design with Lock Release Button
The Nissin Di700A flash head can be tilted upwards 90 degrees and down 7 degrees. It rotates left and right 180 degrees. The locking mechanism incorporates a lock release button, allowing the flash head to lock into any chosen position.
24-200mm Zoom Range
The Nissin Di700A's zoom can be adjusted from 24mm-200mm with a maximum guide number of 54. When used with the Air 1 Commander, the zoom range is adjustable from the Commander.
Durable Metal Hot Shoe Design
The Nissin Di700A incorporates a tough metal hot shoe design, providing a strong connection to cameras and light stands. Note that the Sony hot shoe, while still durable, is not metal due to Sony's multi-interface shoe design.
High Speed Sync Capable
The Nissin Di700A supports 1/8000 shutter speeds where available.
Flexible Power and Cable Sync Options
The Nissin Di700A uses 4AA batteries for power. The Di700A also incorporates an external power socket for use with the Nissin PS8 power pack. It also has a built-in 3.5mm PC port for flash sync cable attachment.
Nissin Di700A Flash Compatibility
The Nissin Di700A Flash + Air 1 Commander Kit is available for Canon, Fujifilm, Nikon, Panasonic/Olympus (Four-thirds) and Sony camera systems. The Di700A supports each system's full TTL capabilities.
Please refer to the following Nissin compatibility chart for the latest camera compatibility information (.pdf file).
Nissin Flash Compatibility (.pdf file)
Nissin Di700A Specifications
|Guide No. (at ISO 100 in M)||GN54 (at 200mm zoom head position) GN48 (at 105mm zoom head position) GN28 (at 35mm zoom head position)|
|Focal length coverage||24 - 200mm (16mm when using build-in wide panel)|
|Power Source||Four size-AA Alkaline, 1.2V NiMH batteries|
|Battery loading system||Quick loading – Battery Magazine (BM-02) (*1)|
|Recycling Time||0.1 - 4 Sec|
|Number of flashes (Approx.)||200 - 1500 flashes|
|Flash duration||1/800 - 1/30,000 Sec|
|Exposure control||E-TTL II / E-TTL (Canon), i-TTL (Nikon) and ADI/P-TTL (Sony)|
|Wireless Mode||2.4GHz Wireless TTL Slave: radio transmission (NAS specifications) Optical Wireless TTL Slave (only correspond to the same brand of camera systems) (*2) Optical slave mode (*3) (SD / SF mode)|
|EV compensation on flash||-2 to +2 EV in increments of 1/2 EV|
|Bounce position||Up: 90°, Down: 7°, Left: 180°, Right 180° (with flash head tilting / rotating lock release button)|
|Flash exposure control||1st- Curtain synchronization, 2nd- Curtain synchronization, Highspeed synchronization, Red-eye reduction, Slow synchronization (only available on Nikon Model), FE / FV Lock (set on camera)|
|AF-assist beam effective range||0.7 – 6m/ 2.3 – 19.7 feet|
|Operation panel||LED Color panel, select dial|
|External service ports||External power source socket, standard and 3.5mm PC sync terminal|
|Radio specifications||2.4GHz ISM band (Obtaining technical standards conformity certification)|
|Channel||8 channels (Channel setting in Air 1)|
|External Power Pack||Support Nissin PS 8 & PS300 External Power Pack (Optional Accessories)|
|Accessories||Soft case, flash stand (with screw)|
|Dimensions||140(H) x 75(W) x 115(D) mm/ 5.5 (H) x 3(W) x 4.5(D) inches|
|Weight||380g/ 13.4oz (without batteries)|
Rogue FlashBender v2 Small Soft Box Kit
When to Use a FlashBender Small Reflector, or a FlashBender Small Soft Box
The Small Soft Box Kit is ideally suited for on-camera use because it is smaller and lighter than other FlashBenders.
When attached to your on-camera flash the FlashBender v3 Small Reflector will soften the light from your flash whether you're shooting inside under a white ceiling, or outside in the open.
If you want an even softer light, or need to eliminate bounce flash because you are shooting under an off-color ceiling (yellow, orange, etc.), then configure the FlashBender into a soft box by attaching the included Rogue Small Diffusion Panel.
The FlashBender v2 Small Reflector can also be used to modify the light from your off-camera flashes. Attach the Small Reflector to your off-camera flash and manipulate its shape to control the light on your main, background, accent, or hair light.
Makes a soft box, bounce flash reflector, gobo, or snoot
Packs flat / great for travel
Attaches quickly & securely
Adjustable to fit all popular brands of accessory flash
For on-camera or off-camera flash
Size: 10.5" x 7" (254mm x 178mm)
Total Kit Weight: 4.3 oz (122g)
Contents:Rogue FlashBender v2 SMALL Reflector
Diffusion Panel SMALL